Constant Temperature Bath
Used to maintain in water the Marshal specimens to be tested at 600 ¬+ 10 (Asphalt specimens) or 37.80 + (Tar Specimens) as prescribed by the specifications. The Same Water bath can also be used for Penetration test, Stripping test or even soundness test of cement with the use of additional accessories. Available in different sizes and temperature control system. |
 |
Environmental Test Chamber
Double walled, inside chamber stainless steel, outer body made of CRC/G.I. - powder coated, Temp. Range from ambient +5° C to 60° C controlled by Dual Display Microprocessor based Digital Temp. Controller with +/- 0.5° accuracy, Humidity range from atmospheric humidity to 95 % controlled by Dual display Microprocessor based Digital Temp. Controller (Dry and Wet bulb method) with + 3 % RH. Inner water tank made of stainless steel with ball cock valve. Front door has a full view glass observation window. |
 |
Horizontal Autoclave
The unit has outer chamber, inner chamber, Boiler, Lid and Jacket - all made of AISI 304 grade stainless steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. The unit have a very efficient ms radial locking arrangement, fitted on ms ring, duly chrome plated. It is supplied complete with vaccum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular ms stand. Operatable on single / three phase, 220/440 volts, 50Hz A.C. Supply. |
 |
Hot Air Oven
No data available... |
 |
Hot Plate (Rectangular)
Body made of thick PCRC sheet-power coated or stainless steel (S.S.304).Top plate made of heavy C.I. or stainless steel and is fitted with the body in such a way that, the body gets minimum heat while the top plate is fully heated. Supplied complete with pilot indicating lamps, power plug and cord wire to work on 220/230 AC, Single phase. With three heat control switch and energy regulator. |
 |
Hot Plate (Round)
Body made of thick PCRC sheet-power coated or full stainless steel (S.S.304). Top plate made of heavy C.I. or stainless steel (S.S.304) and is fitted with the body in such a way that, the body gets minimum heat while the top plate is fully heated. Supplied complete with pilot indicating lamps, power plug and cord wire to work on 220/230 AC, Single phase. With three heat control switch and energy regulator. |
 |
Humidity Oven
Double walled, inside chamber stainless steel, outer body made of CRC/G.I. - powder coated, Temp. Range from ambient +5° C to 60° C controlled by Dual Display Microprocessor based Digital Temp. Controller with +/- 0.5° accuracy, Humidity range from atmospheric humidity to 95 % controlled by Dual display Microprocessor based Digital Temp. Controller (Dry and Wet bulb method) with + 3 % RH. Inner water tank made of stainless steel with ball cock valve. Front door has a full view glass observation window. |
 |
Lab. Grinders
Recommended for grinding of dry chips. Also for a great variety of commercial dry materials. Unit havin two stationary steel blades and rotary with steel edges provided in the cast iron chamber.A removable safety glass sheet plate form the face of chamber permits observation during operation. Willey mill is fitted on substantial cast iron case. Complete unit supplied with alumnium/cast chamber, polished hopper with cover, wooden plugger, three delivery tubes mounted eith sieves cloth mesh no 20, 40 and 60 mesh, one allen key for adjusting blades and 3 glass jars,brush etc.
|
 |
Laboratory Stirrers
Light Duty Stirrer, 1/20 HP 4000 RPM AC/DC Motor, S.S. shaft with chuck & mount on electronic speed regulator. Cap 6-8 ltrs. |
 |
Magnetic Stirrer
Stainless steel body, S. S./epoxy coated top plate, variable speed control, with one Teflon coated magnetic stirring paddle. |
 |
Tray Dryer (Drying Oven)
The large capacity Ovens and tray driers boasts generous size working chamber and the same time offers extremely uniform temperature distribution. These are quite suitable for industrial use like paint baking varnish baking, plastic granules drying, chemical & powder drying, electrode drying, teflon coating, annealing, core hardening, aging or preheating. |
 |
Vacuum Pump
Complete with base, motor, pulley and belt. The pump mechanism is contained in a metal case with oil level and drain plug at base. Pump speed 450 RPM. Ultimate vacuum 0.01 mm/Hg. ( Single stage). Complete with non-return valve, belt gauge and vacuum gauge with regulator. ELECTRIC MOTOR WILL BE GODREJ/AUE/CROMPTON OR EQUIVALENT REPUTED MAKE |
 |
|
